Electric bike is a traffic tool which can instead of walk and has a high safety factor and comfortable running feeling.However, it also have many precautions that we need to considered in order to be better used by us.The following is a specific introduction of "What needs to be considered before riding an electric bike".
1.Insufficient tire pressure will increase the friction between the tire and the road ,it will also reduce the turning flexibility of the handlebars, affecting the comfort and safety of riding. When tyre atmospheric pressure lacks it will gives rise to unfavorably the influence on safety and economic nature of electric bike.
2.If the handlebars are inflexible, stuck or stiff, it should be lubricated or adjusted in time. Calcium base or lithium base grease are generally used for lubrication.
3.The poor flexibility of the front and back wheels will increase the rotational friction and power consumption.Therefore, if there is a fault, it should be lubricated and maintained in time.In case of shaft failure, the steel ball or shaft can be replaced. In case of motor failure, it could be invited to professional maintenance personnel disassembly and maintenance.
4.Check the battery power before riding,and judge whether the battery power is sufficient according to the mileage. If the power is insufficient, it should be appropriately supplemented by human riding to avoid undervoltage of the battery.
5.Check the working condition of the motor before riding.If there is any abnormal phenomenon, it should be repaired in time.
6.Before using electric bicycles, check the lights and horns,especially when riding in the evening. The headlights should be bright,and the horn should be loud without hoarseness; The turn light flash normally,and the instrument display should be normal as well.
7.Check whether the main fasteners are normal before riding, such as the horizontal pipe, the vertical pipe, the saddle, the saddle pipe, the front wheel, the rear wheel, the middle axle, the lock nut, the pedal should not be loosened. If the fasteners are loose or fall off, it should be tightened or replaced in time.
The above information is for your reference, please contact us if you have any questions.